View CL-L233-MC13L1-C_5005872.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

SPECIFICATIONS
1/9
1. Scope of Application These specifications are applied to the chip type LED lamp , model CL-L233-MC13L1-C
2. Part code
CL-L233-MC13L1-C
Series L233 : White power LED for general lighting. Special specifications M : General Color Rendering Index Typ. 85 Type. Watt Class C13 : 13 watt package. Lighting color L1 : Energy Star Correlated Color Temperature 3000(K) Revision Symbol No sign: First Editon , AZ: Revision
Approved Checked
K.Funakubo 2010/3/5 S.Imai 2010/3/5
Drawn
H.Matsuura 2010/3/5
Symbol Name Drawing No
CITILED
CL-L233-MC13L1-C
2010/3/5 Mark Date
Issue of first edition Description Appro.
AD3E-101-01
CITIZEN ELECTRONICS CO.,LTD. Ref.CE-P636 03/10
SPECIFICATIONS
3. Outline drawing
2/9
Cathode
Tc Measurement Point
x12
Anode x12 x12
Protection device It has a protection device built in as a protection circuit against static electricity.
4. Performance ( 1 ) Absolute Maximum Rating Parameter Power Dissipation Forward Current Forward Pulse Current Reverse Current Operating Temperature Storage Temperature Symbol PD IF IFP IR TOP TST Rating Value 17.7 840 1,200 1 -30 ~ +85 -40 ~ +100 Unit W mA mA mA C C *1
120 Tj Max C Junction Temperature *2 *1 Forward Current : Duty<=1/10 , Pulse Width<=10msec *2 D.C. Current : Tj = Tc + Rj-c x PD Pulse Current : Tj = Tc + Rj-c x Pw(Power Dissipation / one-Pulse) x duty
Approved Checked
K.Funakubo 2010/3/5 S.Imai 2010/3/5
Drawn
H.Matsuura 2010/3/5
Symbol Name Drawing No
CITILED
CL-L233-MC13L1-C
2010/3/5 Mark Date
Issue of first edition Description Appro.
AD3E-201-01
CITIZEN ELECTRONICS CO.,LTD. Ref.CE-P636 03/10
SPECIFICATIONS
( 2 ) Electro-optical Characteristics Parameter Forward Voltage Luminous Flux
General Color Rendering Index
3/9 ( Tc=25 C )
Symbol Condition VF v Ra Rj-c
IF=720mA IF=720mA IF=720mA
Junction-case
Min. 17.50 819 80 -
Typ. 18.60 960 85 2.4
Max. 21.0 -
Unit V lm C/W
Thermal Resistance
Chromaticity coordinates ( Condition : IF=720mA ,Tc=25 C ) Color rank x y Center 0.4338 0.4030 a 0.4562 0.4260 L1 b 0.4299 0.4165 c 0.4147 0.3814 d 0.4373 0.3893 *Color region stay with in MacAdam "3-step" ellipse from center.
0.43 0.42 0.41 y 0.40 0.39 0.38 0.41 0.42 0.43 x 0.44 0.45 0.46
Note: The tolerance of measurement at our tester is VF3% , v10% , Chromaticity(x,y)0.005.
Approved Checked
K.Funakubo 2010/3/5 S.Imai 2010/3/5
Drawn
H.Matsuura 2010/3/5
Symbol Name Drawing No
CITILED
CL-L233-MC13L1-C
2010/3/5 Mark Date
Issue of first edition Description Appro.
AD3E-301-01
CITIZEN ELECTRONICS CO.,LTD. Ref.CE-P636 03/10
SPECIFICATIONS
4/9
5. Characteristics
Forward Current vs. Forward Voltage
19.5 19.0 18.5 VF [V] 18.0 17.5 17.0 16.5 0 200 400 600 800 1000 IF [mA] Tc=25C Relative Luminous Flux [a.u.]
Forward Current vs. Relative Luminous Flux
140% 120% 100% 80% 60% 40% 20% 0% 0 200 400 600 800 1000 IF [mA] Tc=25C
Forward Current vs. Chromaticity Coordinate
0.020 0.015 0.010 0.005 x, y 0.000 -0.005 -0.010 -0.015 -0.020 0 200 400 600 IF [mA] 800 1000 Tc=25C x y
Case Temperature vs. Chromaticity Coordinate
0.020 0.015 0.010 0.005 x, y 0.000 -0.005 -0.010 -0.015 -0.020 0 20 40 60 Tc [C] 80 100
IF=720mA x y
Approved Checked
K.Funakubo 2010/3/5 S.Imai 2010/3/5
Drawn
H.Matsuura 2010/3/5
Symbol Name Drawing No
CITILED
CL-L233-MC13L1-C
2010/3/5 Mark Date
Issue of first edition Description Appro.
AD3E-401-01
CITIZEN ELECTRONICS CO.,LTD. Ref.CE-P636 03/10
SPECIFICATIONS
5/9
Case Temperature vs. Forward Voltage
19.5 19.0 18.5 [V] 18.0 17.5 17.0 16.5 0 20 40 60 80 100 Tc [C] IF=720mA
Case Temperature vs. Relative Luminous Flux
120% Relative Luminous Flux [a.u.] 100% 80% 60% 40% 20% 0% 0 20 40 60 80 100 Tc [C] IF=720mA
Case Temperature vs. Allowable Forward Current
Relative Emission Intensity [a.u.] 900 800 700 600 IF[mA] 500 400 300 200 100 0 0.0 25.0 50.0 75.0 100.0 125.0 Tc [C] 1.2 1.0 0.8 0.6 0.4 0.2 0.0
Spectrum
IF=720mA
350
450
550 [nm]
650
750
Approved Checked
K.Funakubo 2010/3/5 S.Imai 2010/3/5
Drawn
H.Matsuura 2010/3/5
Symbol Name Drawing No
CITILED
CL-L233-MC13L1-C
2010/3/5 Mark Date
Issue of first edition Description Appro.
AD3E-501-01
CITIZEN ELECTRONICS CO.,LTD. Ref.CE-P636 03/10
SPECIFICATIONS
6/9
6. Reliability (1) Details of the tests Test Item
Test Condition Ta=-25 C, IF=480 mAx 1000 hours(with Al-fin) Continuous Operation Test Ta=50 C,IF=480 mAx 1000 hours(with Al-fin)
Low Temperature Storage Test -40 C x 1000 hours
High Temperature Storage Test 100 C x 1000 hours
Moisture-proof Test Thermal Shock Test
60 C, 90 %RH for 1000 hours -40 C x 30 minutes - 100 C x 30 minutes, 100 cycle
(2) Judgment Criteria of Failure for Reliability Test
Measuring Item Forward Voltage
Total Luminous Flux
(Ta=25 C) > U x 1.1 < S x 0.85
Symbol Measuring Condition VF v
Judgment Criteria for Failure
IF=720mA IF=720mA
U defines the upper limit of the specified characteristics. S defines the initial value. Note: Measurement shall be taken between 2 hours and 24 hours, and the test pieces should be returned to the normal ambient conditions after the completion of each test. Similar product's reliability test results will be used for CL-L233-MC13L1-C.
Approved Checked
K.Funakubo 2010/3/5 S.Imai 2010/3/5
Drawn
H.Matsuura 2010/3/5
Symbol Name Drawing No
CITILED
CL-L233-MC13L1-C
2010/3/5 Mark Date
Issue of first edition Description Appro.
AD3E-601-01
CITIZEN ELECTRONICS CO.,LTD. Ref.CE-P636 03/10
SPECIFICATIONS
7. Packing Specifications (1) Packing
7/9
An empty tray is placed on top of a five-tier tray which contain 40 pieces each. The set of five trays is banded together with two rubber bands. (Smallest packing unit: 200 pieces) A label with product name, quantity, lot number is placed on the upper empty tray.
Tray (Dimensions: 310 x 200 x 14.6mm / Materials: Electrically conductive PS)
< Packing figure >
310
210
Product 50pcs/tray
< Example of indication label >
CUSTOMER 1. TYPE e.g. CL-L233-MC13L1-C 2. P.No. (Cutomer's P/N) e.g. xxx 3. Lot No. e.g. 03D001 - First letter: Last digit of the year e.g. 0 : year 2010 - Second letter: Production month e.g. 3 : Mar Note: October, November and December are designated by X, Y and Z, respectively. - Third letter: CE's control number e.g. D001 4. Quantity e.g. 200 pieces
TYPE CL-L233-MC13L1-C---(1) ---(2) xxx P.NO ---(3) LOT No 03D001 ---(4) Q'ty 200 pcs.
PASS
CITIZEN ELECTRONICS
Approved Checked
K.Funakubo 2010/3/5 S.Imai 2010/3/5
Drawn
H.Matsuura 2010/3/5
Symbol Name Drawing No
CITILED
CL-L233-MC13L1-C
2010/3/5 Mark Date
Issue of first edition Description Appro.
AD3E-701-01
CITIZEN ELECTRONICS CO.,LTD. Ref.CE-P636 03/10
SPECIFICATIONS
Precautions
1. Avoid the application of any stress to the lens portion. 2. Avoid any contact by a sharp metal nail or other materials with the lens portion.
8/9
Resin portion (Shaded area) 3. This product should be secured firmly by fastening an M3 screw on both sides of the product. Please be careful not to apply any stress to the product during the clamping operation. As the connection status could vary depending on materials of outer heat sink, please check thoroughly.
M3screw (Insulation)
Recommended torque : 0.6~0.8N-m
Thermal conductive silicon grease (Insulation paste) Outer heat sink
19.5mm
Recommended installation screw pitch
4. Thermal conductive silicone grease should be applied to the whole rear surface so that this product can dissipate heat as a whole. However, the use of insulating paste is strongly recommended in order to avoid short circuit. This product could be bent during the clamping operation if heat grease in sheet form is used. For this reason, it is recommended that grease in paste form is used. In addition, sufficient insulation should be established between heat sink area of LED package and surface of fixture. (*surface of fixture: exterior of instrument used for dielectric strength test in Electrical Appliance and Material Safety Law.) 5. Handling of static electricity - These products are sensitive to static electricity charge. Please take measures to prevent any static electricity being produced such as the wearing of a wristband or anti-static gloves when handling this product. - All devices, equipment and machinery must be properly grounded. It is recommended that precautions be taken against surge voltage to the equipment that mounts the LEDs. - ESD sensitivity of this product is 1000V (HBM, based on JEITA ED-4701/304). - When inspecting the final products in which LEDs were assembled, it is recommended to check whether the assembled LEDs are damaged by static electricity or not. - It is easy to find static-damaged LEDs by a light-on test.

Judgmental criterion Condition IF=Max.1mA/die
No-lighting in entire block making up parallel circuit is unacceptable
L233 consists of three blocks.
Approved Checked
K.Funakubo 2010/3/5 S.Imai 2010/3/5
Drawn
H.Matsuura 2010/3/5
Symbol Name Drawing No
CL-L233-MC13L1-C
2010/3/5 Mark Date
Issue of first edition Description Appro.
AD3E-801-01
CITIZEN ELECTRONICS CO.,LTD. Ref.CE-P636 03/10
11.0mm
Spring washer ( 6mm) Plane washer ( 6mm)
CITILED
SPECIFICATIONS
Precautions (continued)
6. Please be aware that this product should not come into contact with any other parts in assembled status. 7.Drive circuit - A constant current circuit is recommended as a drive circuit. And when two or more LED packages are connected, the series connection between each package is recommended. - Please design a circuit that prevents any reverse voltage (excess current) from being applied to this product instantaneously when the circuit is ON or OFF.
9/9
8. Heat generation - As this product is designed with consideration of the heat release property of module, a heat release design is required to use this product efficiently. Please ensure that heat generation is not in excess of the absolute maximum rating. (Refer to 4-1 Performance) - Factors responsible for an increase in temperature include heat generation attributed to ambient temperature conditions or power dissipation. Thus, drive conditions should be taken into consideration, depending on ambient temperature (Ta). 9. Recommended soldering - Soldering operation should be performed within 3.5 seconds per land using a soldering iron of 40W or lower. The temperature of a soldering iron should be adjusted 350C or lower. - No external force is applied to sealing resin during soldering operation. - Please do not handle a product until it returns to a normal temperature. Note: This product is not adaptable to reflow process. 10. Other - This product complies with RoHS directives. - This product is intended for the application in general electronic devices (such as office automation equipment, communication devices, audio-video equipment, home electrical appliances, measurement hardware and others). In cases where this product is used for the applications that requires high reliability or could directly affect human life or health due to failure or malfunction (aerospace hardware, medical equipment, atomic control equipment and others), please consult with our sales representatives beforehand. - Our warranty does not cover situations where this product undergoes secondary fabrication such as changes in shape. - An agreement of formal product specifications is required prior to mass production. - The specifications and appearance of this product are subject to change without advanced notice.
Approved Checked
K.Funakubo 2010/3/5 S.Imai 2010/3/5
Drawn
H.Matsuura 2010/3/5
Symbol Name Drawing No
CITILED
CL-L233-MC13L1-C
2010/3/5 Mark Date
Issue of first edition Description Appro.
AD3E-901-01
CITIZEN ELECTRONICS CO.,LTD. Ref.CE-P636 03/10

▲Up To Search▲

Price & Availability of CL-L233-MC13L1-C

	To Download CL-L233-MC13L1-C Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .